@@
?            - Type "?[LETTER]" for HELP with a single command.
               For example, type "?U" for HELP with UPLOADING.
               Be sure to hit <Enter> or <Return> after each command.

@@ A
A            - Command is used to abort text download and msg list. This may
               not abort the list at once as there is always some text still 
               in the buffer. Only enter "A" once.

@@ B
B            - Command logs you off the BBS and disconnects your call.

@@ D
D            - Command lets you Dowmload TEXT files from the BBS files section.
               Syntax: D [filename] <line#> <line#> You MUST use PC/MS-DOS  
               filenames.You may specify line numbers to look at only a 
               portion of the file.
             - Type "D USER.DOC" to download an entire file.
             - Type "D USER.DOC 10" to list the first 10 lines.
             - Type "D USER.DOC 10 20" to list lines 10 through lines 20.
               Many of the files will be in Sub Directories. Sub
               Directories are show as <DIR>. In this case to download
               a file you must enter the Sub Directory name followed
               by  a \ then the file name ie D YAESU\FT290.MOD
               You CANNOT download binary <BIN> files using the D command.
               You must use YAPP to download binary <BIN> files (YD).
  NOTE: You can't "download" mail. Use the "R" command to READ messages.

@@ F
F            - Command searches the BBS database of callsigns in order to
               find which BBS a given user normally uses. This information is
               not guaranteed to be totally accurate, since it relies on the
               home BBSs given when a message is sent via the NTS system.
F G9XXX      - To find which BBS G9XXX normally uses.

@@ H
H
Message Commands  :    (A)bort         (K)ill         (R)ead
Message Commands  :    (P)ause         (S)end         (SR)Send Reply
Megsage Commands  :    (L)ist          (LM)List Mine  (LG)List Groups
Text File Cmds    :    (D)ownload      (U)pload       (W)hat
Yapp Commands     :    (YD)ownload     (YU)pload
Misc Commands     :    (H)elp          (F)ind Call    (V)erbose
Misc Commands     :    (B)ye           (I)nfo         (JK)Calls Connected
Misc Commands     :    (?#) Help Cmd eg:-?L ?S        (T)alk to sysop
 
                For More Detailed Help On Any Command Type ?#
                    Where # Is The Letter Of The Command. 
@@ I
I            - Command gives you information about this BBS.

@@ J
JK           - Command gives you a list of calls connected to the BBS

@@ K
K            - Command [Kill] lets you KILL only messages sent BY YOU or sent
               TO YOU.
             - Type "K[space][message#]" to KILL a specific message.
KM           - KILL ALL messages sent to you that you have read [Kill Mine].
     This will NOT kill any new mail to you that you have not read.
 
@@ L
L                - Command LISTS messages in the mailbox.
L                - LIST new msgs since you last used the L command.
LG               - LIST groups and numbers of bulletins on bbs.
LG GROUP         - LIST all messages in that 'GROUP' ie LG AMSAT.
LM               - LIST all msgs TO YOU [List Mine].
LN               - List UNREAD msgs TO YOU [List New].
LF 10            - LIST the FIRST 10 msgs [List First]
LL 10            - LIST the LAST 10 msgs [List Last].
L< [callsign]    - LIST msgs FROM [callsign].
L> [callsign]    - LIST msgs TO [callsign].
L@ [callsign]    - LIST msgs TO BBS[callsign].
L  [msg#]        - LIST ONLY msgs ABOVE a given number.
L  [msg#] [msg#] - LIST a group of messages.
L! [Word]        - Searches message SUBJECT: field for a given word.
                   and returns a list of all messages containing the word.
                   ie L! Swap will return a list of all messages with the
                   word "Swap" in the subject field.
      NOTE: The "L" command will now only list the last 50 messages 

@@ N
N                - N[space][YourFirstName]<enter>" to enter your name.

@@ P
P                - P <Enter> Toggles the Pause cmd, When you Type say "LL 30"
                   it lists 20 then waits for you to Type RETURN or A to 
                   Abort current listing. 

@@ R
R [message#]     - READ a specific message.
                   You may have up to 6 message numbers per line.
RM               - READ ALL messages addressed to YOU [Read Mine].
RN               - READ ALL NEW messages addressed to YOU [Read New].
                   To READ msgs #313 and #325 type "R 313 325". Don't forget
                   SPACE.
R! [Word]        - Read all messages with the [Word] in the SUBJECT:
                   ie. R! Wanted will allow you to read all messages
                   with the word 'Wanted' in the Subject.
                   Use L! first to make sure what you are reading
                   as there could be hundreds of messages with the
                   word in the subject. Use with care.
                   NOTE: You READ messages sent with the "R" commands.
                   To DOWNLOAD files you use the "D" command.
R< [callsign]    - READ msgs FROM [callsign].
R> [callsign]    - READ msgs TO [callsign].
R@ [callsign]    - READ msgs TO BBS[callsign].

@@ S
S                     - Command lets you SEND MESSAGES (not "files").
SP [callsign]         - SEND a PERSONAL message.
SP [callsign] @ [bbs] - SEND a message to a station AT another BBS by      
                        automatic mail forwarding.
SB ALL                - SEND a general bulletin addressed to ALL.
                        NOTE To upload files use the "U" command.
SR                    - To Send Reply to a message e.g..SR 1234 will
                        automatically a message back to the sender of No 1234

@@ T
T               - Type "T<enter>" to TALK to the SysOp.
                  If SysOp IS available to chat, you'll get a response within
                  30 seconds type any thing to cancel.

@@ U
U               - Command lets you UPLOAD a TEXT file TO the BBS file section.
                  Type U filename.extension<enter>" to upload a file.
                  For example, type "U BORK.DOC<enter>" to upload the file
                  "BORK.DOC".
                  You will be asked to enter a SHORT description of
                  your file before you upload it.
                  Note:- You CANNOT UPLOAD BINARY files with U you
                  must use YAPP (YU).
@@ V
V               - Shows the number of active messages and the next message
                  number.
V<enter>        - To see this BBS's software version.
V [message#]    - To READ a specific message.
                  You may have up to 6 message numbers per line.
VM              - READ ALL messages addressed to YOU [Read Mine].
VN              - READ ALL NEW messages addressed to YOU [Read New].
                - To READ msgs #313 and #325 type "V 313 325". 

@@ W
W               - Command lists the FILES available on disk. Depending on  
                  system capacity, files may be divided into sub-directories
                  by class or category.
W<enter>        - To list the MAIN file directory [What files].
WN<enter>       - To list NEW files in the MAIN directory [What New].
                  New means new since the last time you logged . There may be
                  sub-directories, which will appear as "MAPS    <DIR>" when
                  you do the directory listing.  To list the files in these 
                  directories, type the sub-directory name after the W. 
                  ie WN YAESU or WN ICOM
                  A file may be either plain text <TXT> or binary <BIN>.
                  A binary file may only be download using YAPP.
                  Each file when listed will have a short description
                  beside it.
 For example:
W DOCS<enter>   - To list the DOCS directory.
W ICOM<enter>"  - To list the ICOM directory.

W!              - Keyword search for files. Searches for all files
                  with a specified keyword in the file name or
                  description.
For example :
W! FT7400       - list all files with FT4700 in the name or description.

@@ Y
Y               - YAPP binary file transfer
YD              - YAPP Download
YU              - YAPP upload.
For exmaple :
YU UTIL.EXE     - upload UTIL.EXE using YAPP binary transfer
For example :
YD FRED.COM     - download FRED.COM using YAPP binary transfer
                  Files may be Sub Directories. If this is the case
                  you must enter the Sub Directory followed by a \
                  then the file name ie YD UTILS\PROG.COM
                  You can DOWLOAD and UPLOAD both TEXT <TXT> and
                  BINARY <BIN> files using YAPP.
                  Please Note: Files uploaded with YAPP go into a seperate
                  directory that cannot be accessed by users.

@@ X
X               - command changes your status between "normal" and "eXpert"                      user.
!! 1                       SYSOPS HELP PAGES INDEX              Page 1 Of 7
                        =============================

       A to K Cmds.................................. Page 2
       L to S Cmds.................................. Page 3
       S to Z Cmds.................................. Page 4
       Yapp Cmds.................................... Page 4
       *Dos Cmds.................................... Page 5
       Carbon Copy ................................. Page 6
       Text Editor Cmds............................. Page 7
!! 2
A To K                        SYSOPS HELP PAGES                 Page 2 Of 7
                           =======================
A.........Abort Listing Or Read    A file....Move File Frm Upload To File Dir
B.........Force Fwd Only If Hr ok  BI call...Force Fwd To Bbs Any Time
CF File...Change Fwd File          CR File...Change Rev Fwd File
CL File...Change Logon File        EU Call...Edit User File
D File....Dowm load File In Local  DU Call...Display User Info
DW........Display Wp Info          DW BBS....Diasplay WP info On Bbs's
EF File...Edit File With Text Edit EM 12.....Edit Message 12
EU Call...Edit User Callsign       EW Call...Edit User in WP Data Base
F Call....Find A Callsign From WP  FL ca.....Mail To Be Forwarded
FL G*.....All Mail to be forwarded H.........Help file (HELP.HLP) This File
I.........Info file  (INFO.HLP)    I Import..Import Mail From Disc File 
K 2.......Kill Message 2           K$ 1 20...Kill block Of msg's ie:- 1 20
K< Call...Kill All Mail From Call  K> Call...Kill All Mail To Call
K@ Call...Kill All Mail @ bbs      KM........Kill Mine
KY........Kill Personal Read Mail  KO........Kill Old Msg's
KZ........Kill Msg With No Save To Old Dir
!! 3
L To S                        SYSOPS HELP PAGES                Page 3 Of 7
L.........List new Messages        LL 12.....List Last 12 Messages
L>........List To Call             L<........List From Call
LH........List Held Msg's          L@ Bbs....List Msg's By Field ie:- L@ GBR
LB........List Bulletins           LF 10.....List First 10 Msg's
LG........List Groups Of Bulls     LO........List Old
LH........List Held Mail           LP........List All Personal Msg's
LY........List All Read Msg's      L! Fred...List Search using the word FRED
M.........Mail Beacon              N.........Name change
MF 1 File...Make File from msg 1 (/Prn = print : /a = append to file )
OP........All Output To Printer    OP File...All Output From Screen To Disc
P Call....Passord For remote sysop Q.........Quit Program
R 12......Read Msg No 12           RO........Read Old Mail
RM........Read Mine                RN....... Read New Mail
RA 12.....RA 12 To @ From (Type * To Leave)
R! WORD...Read msg with WORD in SUBJECT
R< Call...Read all MSG from call.  R>Call....Read all MSG from callsign.
R@ Call...Read all message @ BBS.  S.........Status Report For All Ports
!! 4
S To Z                        SYSOPS HELP PAGES               Page  4 Of 7
                           =======================    

SB........Send Bulletin            SR........Send Reply to sender of message
SP USERS..Send msg to all users    SP........Send Personal Mail
WU........Whats in Upload Dir      U file....Upload a file from LOCAL window
V.........Version Number           V 12......Verbose  read of Message No 12
W.........What files in Dir        Z File....Delete File

                            YAPP  FILE COMMANDS
ALT C.....Terminates YAPP in Term mode
ALT D.....YAPP Download in Term Mode  ALT U.....YAPP Upload in Term Mode
ALT S.....All Screen Output To Disc

!! 5                        
                     DOS COMMANDS FROM LOCAL WINDOW              Page 5 Of 7
*COPY File1 File2.....Copy File 1 To File 2 (No Wild Cards)
*COPY File Prn........Copy File Printer
*DEL File.............Delete File (No Wild Cards)
*REN File1 File2......Renames File1 File2
*TYPE File............Displays Contents Of Text Files
*CD Dir...............Changes Dir To "Dir"
*CD...................Changes Dir Back To Main BBS Dir
*PWD..................Shows Present Working Dir                                                           CHANGEING FORWARD FILES
+ GB7ZZZ.PER 123.......Adds Message 123 to  GB7ZZZ.PER   Personal file
+ GB7ZZZ.FWD 123.......Adds Message 123 to  GB7ZZZ.FWD   Distribution files 
- GB7ZZZ.PER 123.......Subtract Message 123 from GB7ZZZ.PER Personal file 
- GB7ZZZ.FWD 123.......Subtract Message 123 from GB7ZZZ.FWD Dis. file
+ GB7ZZZ.PER 1 - 100...Add messages 1 to 100 on to GB7ZZZ Personal file
+ GB7ZZZ.FWD 1 - 100...Add messages 1 to 100 on to GB7ZZZ Dis. file
- GB7ZZZ.PER 1 - 100...Subtract messages 1 to 100 from GB7ZZZ personal file
- GB7ZZZ.FWD 1 - 100...Subtract messages 1 to 100 from GB7ZZZ Dis. File
!! 6
                             SYSOP HELP PAGES                  Page 6 Of 7

                               CARBON COPY 
                             ===============
                   (Put Your Local CC Names Here)
 SP ######..............Send Msg To All Locals + 
 SP ##..................Send Msg To All Locals + 
 SP #####...............Send Msg To Sysops 
 SP LOCALS..............Send Msg To Local Users Only.
 SP USERS...............Send Msg To All Users That Log On.


!! 7

                           SYSOP HELP PAGES                    Page 7 Of 7
                         ====================

Page Up...........Move Up 1 Page
Page Down.........Move Down 1 Page
Home..............Move To Beginning of Line
End...............Move To End Of Line
Ctrl Page Up......Move To Top Of File
Ctrl Page Down....Move To End Of File
Ctrl Home.........Move To Top Of Screen
Ctrl End..........Move To Bottom Of Screen
                               ALT COMMANDS
                             ================  
Alt B.............Mark Beginning Of Block      Alt E......Mark End Of Block
Alt D.............Delete Block                 Alt C......Copy Block
Alt M.............Move Block Of Text           Alt F......Find Word
Alt R.............Replace Word                 Alt S......Save File
Alt K.............Delete to End Of Line 
Alt Q.............Quit & Return To Local 
